Wifey Wednesdays- In which I try to talk sewing.

So last night, I had papers to grade. A lot of them. I also was dropping rank in my Fitbit ‘Workweek Hustle’ challenge, and needed to actually exercise.

So what did I do?

Make a skirt, of course!

Skirt- Mostly Finished 2


This is fabric I got on sale at Hobby Lobby— I love when the ‘end of rolls’ section actually has cute patterns! It is technically a knit, but I feel like it just barely qualifies. It stretches slightly, like jersey, but holds shape more like normal cotton.

I started off using the waist band tutorial from Make It & Love It. My plan (before I read the entirety), was just to follow the directions in general. I was already proud of myself for not using a straight up pattern- it was a first, and I was definitely was more willing to take risks in my new space!

However, the problem with using sewing as a procrastination tool, is that you don’t always have all of the materials needed. In this case, the tutorial called for a circle skirt. These are cute, but need a much larger piece of fabric than I had. What to do?

I started off creating the waistband as directed- reading ahead was never my strong suit.

Skirt- Cutting
Thanks for my birthday present Max!

First of all, how tall do you want the band to be? I wanted mine to be about 3 inches. Since you will end up doubling it up AND folding it over, multiply that by four. Add an inch for seam allowance, and that gets you the height for your waistband. For example, mine was 13 inches. In order to make sure that your waistband fits snugly, subtract two inches from your actual waist measurement for the width.

I used my amazing new roller-cutter-thingy. How did I not have one of these before?! 

Now, sew the two edges with the right sides facing each other. This should form a tube of fabric. Use a zigzag stitch to allow for stretching.

After I finished with the waistband, I was left with a good bit of fabric, but not quite enough to actually follow directions. Measuring it out, I had a 58” x 19” bit of fabric. I set my machine to the loosest straight stitch possible, and sewed a quick line down the length of the fabric with 1/2” seam allowance.

Without doing anything else, this brought my 58” down to 43”. I then just held onto the top thread and ‘slid’ the fabric down until it was actually the size of my waist. I then sewed the two sides together to make a skirt shape.

From here, I picked back up at the lovely lady Ashley at Make It & Love It. Fold the waistband onto itself, wrong sides together. Place 8 pins equidistant from each other along the bottom, pinning the open ends together. Do the same thing along the top of the skirt piece.

Then, line up the pins. There will be extra skirt fabric between the pins (Remember, the waist band was supposed to be -2 inches from the waist). You’ll end up having to put the skirt inside the waistband. while doing all of this.

Then, flip it so that the waistband is on the inside, and the skirt is on the outside.

Skirt- Stitched together
Sewn together, before folding the waistband down

Sew the tops together, using the zigzag stitch again (1/2 inch seam). After doing this once, I used a seam ripper to get rid of my earlier ‘loose stitch.’ I then added an additional zigzag stitch around the top.

Cut away extra fabric around the top, and iron flat.

Now, if you used ‘real’ knit, you wouldn’t necessarily need to hem, as knit doesn’t fray. However, I felt mine needed it.

Did anyone else use to avoid ironing before sewing the hem? Because I did. “Oh, that isn’t actually necessary…” “That’s just an extra step…”

Yeah. That was wrong. Iron before you hem. It’s so much easier, plus better looking.

Fold down the waistband, and happy wearing! 

Skirt- Pretty finished


China, China, and More China


In my business, I use china. All of the china I craft with comes from Historic Downtown Charleston, SC. The picture above is but a sample of what I have at my disposal.  I would guess its 1% of my total stockpile. Now when I say it comes from Charleston, I mean thats where I find it.  More specifically, I dig it out of the ground. I go under houses and in their yards to find my pieces of history.

In the times before curbside pickup, people really only had one option for their household garbage and debris. That option? The Yard.  They would have pits where they would dump their trash.  A nice word for the area of dumping is called a “Midden.” This is where I find the china. What are some other things I have found in various middens? I have found bottles, buttons, coins, doll parts, animal bones, oyster shells, tools, silverware, and even once a Megalodon tooth! It is amazing what is just under the surface. The other thing that blows my mind is the immense variety of patterned china that surfaces.  So many seemingly unique styles.

China is my prize.  Almost all of it is 19th Century. I have even found some from the 18th Century: All just in the dirt.

The reason I have all the china out in the first picture is because it is about time to ramp up production again.  I go through periods where I need to replenish finished products and now is that time.  I will be making necklaces, bracelets, rings, cufflinks, hairpins etc. all over the next week or two.  I can’t wait to show you all the completed projects.  Thanks for reading!

Mid 1700’s Piece with Mark of King George

Another New Toy! The Silhouette Cameo!


A quick post for tonight-

Just received my new Silhouette Cameo! It is one heck of a machine. I have only tinkered a bit with it so far but I can’t wait to get cracking with it.  I will be able to do so many new projects. I bought it through Amazon.com and it came with many bonuses. It came with the vinyl starter kit and a whole mess of tool accessories.

First Cutout

As you can tell, I need to practice.  I was a bit off center when I was playing around, but I am amazed at how precise the Cameo is.  I read that with the deep cutting blade, I can cut leather. I have 50 pounds or so of upholstery  leather samples. Should keep me busy. The tool review will come at a later date as I haven’t done much of anything with this machine yet.

Thanks for reading and sorry for the brevity! Till next time-

Wifey Wednesday

Hello all!

I’m here to kick off my weekly Wednesday post. I’ll do my best to hold my own, although Max is really the ‘man with the plan.’ In my real life, I teach fourth grade- and absolutely adore it. It doesn’t hurt that my commute comes with views like this:

si sunrise
Teaching on the island has its perks!

I’m going to write up the first installment about our one-room renovation of the room above our garage, or ‘FROG.’ While it was quite an adventure- including flooring, yards of shelving, and possibly the largest craft table known to mankind- I would like to talk to you about my happy spot, my sewing station.

sewing station.jpeg

There are several things that I love about this spot. It is large enough to really spread out. Also, it has some personality. I’d love to be someone who could sit down and focus no matter where I was, but that just isn’t the case. Even with larger sewing projects, I have more than enough space. Finally, I have storage coming out of my ears!


We were really able to take advantage of the space by opting to create a desk rather than buying one. The base of my workstation is two IKEA Kallax shelving units on their sides- one a 2×2, the other 4×2. Laying across them is an IKEA tabletop- so not only is there a lot of workspace, but it’s even on top of shelving.

The pegboard is an essential piece, and made more of a difference than I thought it would. It has a dual purpose- storage and aesthetic. Now this may seem obvious to other people (I wouldn’t have gotten there by myself, I’m not going to lie), but… the boards are attached to the studs on the wall, and the pegboard is attached to them. This lets them actually be functional! sewing station

For the chevron pattern, Handmade Utah (@2crafty4myskirt) has the best tutorial. Really, it’s easiest to tape out overlapping diagonals, and then use a razor to cut out the chevron pattern. I used a roller, and the extra paint from our front door.

I am so thankful storage is ‘in’ these days- it made the finishing touches so much more fun!

Did y’all see these at Michaels? They had some in their little ‘bargain’ section.

Spice tins

They’re magnetic storage bins- so I have them on the same strip as my good scissors. Pins of various sorts, price tags, paper clips, and bindtilt out binser clips all have their place. I LOVE them! Just as exciting was their tilt out bins, which I have mounted on the side of the table. 

Target also had some great bins in their bargain section— Do you see a theme here?

I have one for stamps and sparkly things, one has my punches, and then the other has ribbon.Baskets

I could seriously go on about all that I have here for days… and probably will 🙂 I’ll be putting more of a focus on the actual sewing side next time! Thanks for reading 🙂

My New Toy: The Taurus 3 Ring Saw


This, my friends, is my new toy. The Taurus 3 Ring Saw from the Gemini Saw Company.  Let me tell you, this is a beast.  Up to this point, to shape any broken pieces of porcelain, I would use clippers that risked cracking things in half.  Now, I can cut out any shape I want! It changes everything. I am going from circles and triangles, to dogs and whales!

Look at my little whale!

I am so excited! Now, I make stencils and trace them out directly on the china with a paint pen. For those of you who don’t know what the ring saw is-it’s a diamond saw blade that can cut in any direction because of its round design. It is also a wet saw which keeps everything cool.  These types of saws are made for the stained glass world, but it is quite useful for porcelain.  I feel much better cutting things now, and I waste less material by cutting out instead of destroying all the bits around it. This allows me to use the leftover bits of china for jewelry projects like bracelet charms.

I decided to see if I could cut out the shape of a Brittany Spaniel…

It could be my Hank or Sadie!

I give this machine a big thumbs up. It revolutionizes my production abilities. I am going to create a rating system to use now and in the future. Five Hammers =Perfect. One Hammer= Don’t Bother.

So The Taurus 3 Ring Saw is awarded…..(drumroll)…..

hammer-black-hi hammer-black-hi  hammer-black-hi  hammer-black-hi  hammer-black-hi

Five Hammers out of Five! It is amazing!

Thanks for reading and remember tomorrow is Wednesday. That means it is the first edition of “Wifey Wednesdays.”  Alli will be taking the helm and posting tomorrow!


Framed Up!


The Inaugural HandyGent Post!

Come one! Come all!

Welcome to the first post of the HandyGent!  I have finally decided to start my own blog. What do I have to offer, you may ask? I am a man who creates.  I thought folks may enjoy a Craft Blog from a man. Simple as that.  The journey I want to take you on involves my various craft projects, home improvement adventures, organization, and tools.

First off, my name is Max.  My wife, Alli, is the best and most supportive spouse one could ever hope for. Keep an eye out for her guest posts! I am thinking about calling them “Wifey Wednesdays.”

Our two dogs are our pride and joy!IMG_2626 Hank and Sadie are the best Brittany dogs you will ever come across! No bias here! They are the inspiration behind our business name. They also come with us to many of our craft shows.  Without them, our lives would be pretty boring. They even have their own instagram account which has more followers than I do.  Their Instagram.



In 2013, I moved to Charleston, SC.  I was working on renovating historic houses in the downtown area.  This is when I seriously became a home improvement geek.  I learned as much as I could and was able to overcome the fear of attempting a project I have never even thought about before.  I learned how to work on plumbing, electricity, remodeling and many other things.  lb18bb443-c0xd-w640_h480_q80While working , I began to find little broken pieces of porcelain in the ground and under the house. I soon realized that these were little shards of history.  The houses I was working on were all over 100 years old and what I was finding was old broken china from past residents which they had discarded into midden pits in the ground. Most of it is pre 1900! And thats when the crafting seriously kicked in.



xdownloadScreen Shot 2015-12-05 at 2.47.35 PM

I started making jewelry out of it all.  I was finding so much china.  Over the next two years, I expanded from making just necklaces.  I now make bracelets, rings, cufflinks, hairpins, and so many other things! My wife and I started calling the business Breton Trading Company.  We began selling at local craft shows and continue to do so.  I am always working on new ways to use the historic china.

Screen Shot 2015-12-08 at 9.26.28 PM

Another thing that came as a result of my work on the old houses is my love of reclaimed wood and materials.  I love how the old wood looks when given new life in new ways.  I love upcycling!

Screen Shot 2015-07-31 at 8.53.49 PM.png
Beer Flight made from old reclaimed handrail.

I do hope everyone will enjoy following me along my journey. I plan on posting about my crafts, my wood projects, home improvement endeavors, and any other adventure I find myself on. Thanks for reading!